Round Glove Port Assemblies

Standard Glove Port


We produce an 8" (200mm) round standard glove port machined from aluminium.

 

Standard Glove Port

 

Mounted through a single round hole in any material with a nominal thickness of 10mm, an internal pressure ring with screw fixings in combination with an integrated "O" ring seal ensures the highest levels of containment integrity are achieved with this glove port assembly.


The standard glove port incorporates a channel to secure the gauntlets bead with a gauntlet retaining rubber band, tape or metal clamp.


Supplied with stainless steel fixings, all necessary "O" ring seals, gauntlet retaining rubber band and pan cover.


Available to suit gauntlets with an 8" (200mm) bead size.

 

Safety Glove Port


We produce an 8" (200mm) round safety glove port machined from aluminium.

 

Safety Glove Port

 

Mounted through a single round hole in any material with a nominal thickness of 10mm, an internal pressure ring with screw fixings in combination with an integrated "O" ring seal ensures the highest levels of containment integrity are achieved with this glove port assembly.


The safety glove port incorporates an additional external retaining ring which mechanically secures the gauntlet to the glove port, ensuring the gauntlet remains in place during an operators movements and thereby maintaining glove box containment. Clearly this method of retaining a gauntlet is superior to the usual method of employing a gauntlet retaining rubber band, tape or metal clamp.


Supplied with stainless steel fixings, all necessary "O" ring seals, secondary gauntlet retaining rubber band and pan cover.


Available to suit gauntlets with an 8" (200mm) bead size.

 

Adjustable Glove Port


We produce a range of glove ports machined from 316 grade stainless steel for installation into existing glove boxes.

 

Adjustable Glove Port

 

Designed to fit through a single round hole in any material with a thickness of between 2mm and 10mm, this construction avoids the difficulty of drilling circumferential fixing holes which are prone to leakage and creating contamination traps, and instead offers a simple method to retro-fit glove ports to your glove box systems.


External split flanges fitted with grub screws apply a force to the glove box containment material in combination with an integrated "O" ring seal located on the internal flange, ensuring this stainless steel glove port provides the highest levels of containment integrity.


Supplied with stainless steel fixings, suitable "O" ring seal and gauntlet retaining band.


Available in four sizes to suit gauntlets with a 6" (150mm), 8" (200mm), 10" (250mm) or 12" (300mm) bead size.

 

Glove Port Change-Over Bung


We produce an 8" (200mm) gauntlet change-over bung designed to permit replacement of a gauntlet without removing the gauntlet from our 8" (200mm) round glove ports and thereby maintaining the controlled environment within the glove box system whilst ensuring essential maintenance may be performed with minimal downtime.

 

Glove Port Change-Over Bung

 

Glove Port Change-Over Bung

 

Constructed to seal internally with our 8" (200mm) round glove ports, the change-over bung permits an operator to isolate the glove port and gauntlet from the glove box and then evacuate and/or purge gas within the gauntlet whilst it remains mounted on the external side of the glove port.


A plastic pipe from the glove port bung connects through a quick release gas fitting mounted in the glove box wall to an externally fitted three way porting valve allowing the operator to manually control the gas purge and evacuation cycles applied to the gauntlet.


Supplied with "O" ring seals, quick release gas fittings, plastic piping & clamps and three way porting valve.


Available to suit our 8" (200mm) glove ports.

 

Product Code

Round Glove Port Assemblies

914-100-001

8" (200mm) Round Standard Glove Port Assembly

914-100-002

8" (200mm) Round Safety Glove Port Assembly

914-001-001

6" (150mm) Round Adjustable Standard Glove Port Assembly

914-001-002

8" (200mm) Round Adjustable Standard Glove Port Assembly

914-001-003

10" (250mm) Round Adjustable Standard Glove Port Assembly

914-001-004

12" (300mm) Round Adjustable Standard Glove Port Assembly

914-100-004

8" (200mm) Round Glove Port Bung Assembly

 

Please phone or email us if you have any questions or require further information.

 

Glove Box Technology